ETM-D dual column floor standing (50~600kN)

The ETM type D Series addresses the needs of standardized and routine testing, providing the user high quality at the most affordable price. The dual column testing systems with rugged structure are suited for tension and/or compression applications with load range requirements from 50kN to 600kN. They are typically used for quality control and production testing.

 

Typical specimens: Metals, building components, large fasteners, composites, wood products

 

Environmental simulation: Environmental chamber and high temperature furnace

 

New Features:

·          Robust guidance columns increase lateral stiffness and ensure linear crosshead travel. This results in accurate crosshead alignment thus reducing variability in measurement data and producing better overall accuracy

·          Non-clutched drives, rated for full speed at maximum force

·          Compact design saves lab space

·          Wider test width

 

High Quality at affordable price


·          Pre-loaded ball screws and heavy duty bearings assure long life with zero backlash as well as linear low force and through zero performance. The result is accurate and repeatable measurements that truly represent the specimen characteristics rather than load frame deficiencies

·          Fully-protected lead screw covers provide longer life and greater operator protection

·          Easy-to-clean aluminum column covers with chamfered corners to facilitate access to the test area. T-slots are built in for simple, convenient attachment and positioning of testing accessories

·          High-speed, low vibration, world-class, maintenance-free, imported AC servo motor and servo controller

·          Photoelectrical encoder built in servo motor system is for position measurement of crosshead

·          Built-in bidirectional load cell is assembled in the middle crosshead to prevent any collisions and simple to perform compression or tension tests

·          Dual action over-travel limits on all frames provide the highest level of safety and meet all international standards

·          Remote control keypad facilitates test operation

·          Full one-year warranty on parts and labor

·         Free software upgrading

Machine dimension: ETM504D ETM105D

Test space

Frame type

Width x Depth x Height

A x B x C (mm)

Crosshead travel

H (mm)

Test width

W (mm)

Single

Standard

1145×765×2340

1150

600

Extended frame

1145×765×2640

1450

600

Dual   space

Upper   compression lower tension

Standard

1145×765×2340

1050

600

Extended frame

1145×765×2640

1350

600

Dual   space

Upper   tension lower compression

Standard

1145×765×2340

1150

600

Extended frame

1145×765×2640

1450

600

 

Machine dimension: ETM205D ETM305D

Test space

Frame type

Width x Depth x Height

A x B x C (mm)

Crosshead travel

H (mm)

Test width

W (mm)

Single

Standard

1210×770×2600

1200

650

Extended frame

1210×770×2900

1500

650

Dual   space

Upper   compression lower tension

Standard

1210×770×2600

1150

650

Extended frame

1210×770×2900

1450

650

Dual   space

Upper   tension lower compression

Standard

1210×770×2600

1150

650

Extended frame

1210×770×2900

1450

650

 

Machine dimension: ETM505D ETM605D

Test space

Frame type

Width x Depth x Height

A x B x C (mm)

Crosshead travel

H (mm)

Test width

W (mm)

Dual   space

Upper   compression lower tension

Standard

1535×1175×3000

1400

700

Extended frame

1535×1175×3300

1700

700

 

Specifications:             

Model

ETM504

ETM105

ETM205

ETM305

ETM505

ETM605

Type

Type   D

Capacity (kN)

50

100

200

300

500

600

Calibration standard

ISO 7500, Class 1 / Class 0.5

Force range

0.2% ~ 100%FS / 0.4   ~ 100%FS

Force accuracy

±1.0% / ±0.5% of reading

Force resolution

1/500000FS

Position accuracy

±0.50% of reading

Position resolution (μm)

0.025

0.014

0.021

Crosshead speed (mm/min)

0.001 ~ 500

0.001 ~ 250

Crosshead speed accuracy

within ±1% / ±0.5% of set   speed

Power requirement

Three-phase, 380±10% VAC,   50/60Hz

Power consumption

1.5kW

5kW

5.5kW

Weight (kg)

1200

1500

2000


IZOTECH (Russia)

ETM605D with automatic extensometer

IZOTECH ETM605D.jpg


0755-23057996