ETM-C dual column table-top (500N-50kN)-WANCE: Material Testing Machines Manufacturer

ETM-C dual column table-top (500N-50kN)

The ETM type C Series addresses the needs of standardized and routine testing, providing the user high quality at the most affordable price. The dual column testing systems are suited for tension and/or compression applications with load range requirements from 500N to 50kN. They are typically used for quality control and production testing.


Typical specimens: Small components, reinforced plastics, metals, wire, composites, elastomers, wood products, textiles, biomaterials, paper products, adhesives, foam, consumer products 

Environmental simulation: Environmental chamber 

New Features:

·          Robust guidance columns increase lateral stiffness and ensure linear crosshead travel. This results in accurate crosshead alignment thus reducing variability in measurement data and producing better overall accuracy

·          Non-clutched drives, rated for full speed at maximum force

·          Compact design saves lab space

·          Wider test width 

High Quality at affordable price  

Ø  Pre-loaded ball screws and heavy duty bearings assure long life with zero backlash as well as linear low force and through zero performance. The result is accurate and repeatable measurements that truly represent the specimen characteristics rather than load frame deficiencies

Ø  Fully-protected lead screw covers provide longer life and greater operator protection

Ø  Easy-to-clean aluminum column covers with chamfered corners to facilitate access to the test area. T-slots are built in for simple, convenient attachment and positioning of testing accessories

Ø  High-speed, low vibration, world-class, maintenance-free, imported AC servo motor and servo controller

Ø  Photoelectrical encoder built in servo motor system is for position measurement of crosshead

Ø  Built-in bidirectional load cell is assembled in the middle crosshead to prevent any collisions and simple to perform compression or tension tests

Ø  Dual action over-travel limits on all frames provide the highest level of safety and meet all international standards

Ø  Remote control keypad facilitates test operation

Ø  Full one-year warranty on parts and labor

Ø  Free software upgrading  

Full complement of test accessories

Extensive range of accessories to meet test requirements in almost any application or industry: plastics, metals, biomedical, composites, elastomers, components, automotive, aerospace, textiles, and more.

·        Tension grip

·        Peel/tear fixture

·        Compression fixture

·        Flexure fixture

·        Film COF test fixture

·        S type load cells: 10N~5kN

·        Long travel extensometer

·        Clip-on extensometer

·        Environmental chamber

·        T-slot table

·        Others


Machine dimension:

Test space

Frame type

Width x Depth x Height

A x B x C (mm)

Crosshead travel

H (mm)

Test width

W (mm)

Single

Standard

775×660×1740

1100

420

Single

300mm Extended

775×660×2040

1400

420

Dual

Standard

775×660×1802

1000

420

Dual

300mm Extended

775×660×2102

1300

420

Adapter: 20kN, 30kN: Ф20mm, 50kN: Ф40mm

Pin: 20kN, 30kN: Ф10mm, 50kN: Ф18mm

 

Specifications:

Model

ETM502, ETM103, ETM303, ETM503,

ETM104, ETM204, ETM304, ETM504

Type

Type C

Capacity

500N, 1kN, 3kN, 5kN, 10kN, 20kN,30kN,50kN

Calibration standard

ISO 7500, Class 1 / Class 0.5

Force range

0.2% ~ 100%FS / 0.4 ~ 100%FS

Force accuracy

±1.0% / ±0.5% of reading

Force resolution

1/500000FS

Position accuracy

±0.50% of reading

Position resolution

0.06μm

Crosshead speed

0.001 ~ 500mm/min

Crosshead speed accuracy

within ±1.0% / ±0.5% of set speed

Power requirement

Single-phase, 220±10% VAC, 50/60Hz, 850W

Weight

400kg

  

Shipping information:

Name

Standard frame

Package

Fumigated wooden case

Crated dimension (Width x Depth x Height)

960*790*2180mm

Crated weight

450kg


ETM-C is suitalbe for various test of Small components, reinforced plastics, metals, wire, composites, elastomers, wood products, textiles, biomaterials, paper products, adhesives, foam, consumer products.

青海大学-C型.png

宜春市建工建材检测中心.png



0755-23057996